BA/RCV900-USB | BAPI | Network & Wireless
WIRELESS RECEIVER 900MHZ W/USB OUTPUT
Brand:BAPI
MPN:BA/RCV900-USB
SKU:BA/RCV900-USB
List Price:
$-.--
Today's Price:
$-.--
Log in for customized pricingproduct series specifications
Supply Voltage:
RCV418 9 to 30 VDC @80mA or 17 to 31 VAC @0.5VA
RCV900 9-15 VDC @80 mA
Output: RS485
Voltage BA/VOM-xx
Current BA/COM-xx
Setpoint BA/SOM-xx
Thermistor BA/ROM-xxx
Relay: (DO) BA/RYOM (momentary, BA/RYOL (latching)
Indication: LED blinks on each reception
Mounting: DIN rail or 2 screws to back plane, Output modules plug into the right side of receiver
Wiring: 1, RP-SMA antenna connection and 2 Power terminals, 22-16 AWG
Operating Temperature: 32 to 140°F (0 to 60°C)
Operating Humidity: 5% to 95% RH non-condensing
Construction: ABS Plastic, UL94, V-0
Enclosure Rating: Indoor, NEMA 1
Dimensions: 2.75"H x 4.8"W x 1.2"D (7.0 x 12.0 x 3.0 cm)
Weight: 0.5 lb (0.2 kg)
Warranty: 2 year
Radio/Radio Receiver:
Protocol: Proprietary (Point Six)
Frequency:
418 MHz or 902 MHz (order specific)
RCV418 418 MHz, direct reception NO repeater
RCV900 902 MHz, requires a repeater to be in the system
Modulation:
418 MHz -Frequency Modulation
902 MHz -FHSS Modulation
Receiver Sensitivity: -110 dBm
Open Air Range:
RCV418 = 100ft from all transmitters, (Open air)
RCV900 = 1000ft from closest repeater, (Open air)
Low Battery Indication: None
Transmission time: 20ms
Antenna: External 418 MHz or external 900 MHz
Channels: RCV418 = 1, RCV900 = 7
Device Addresses: 100 transmissions per minute
Programming: Push button on "Transmitter/Output Module" simultaneously
Repeater Capable: RCV900 only
Approvals: RoHS
product series features
- Eliminates point wiring
- FCC license pre-approved
- Receivers accommodate 127 output modules each
- Receiver sensitivity -106 dBm minimum
- Built In error detection
- Repeater transmit power 100 mW
- 1000-foot repeater range (open air)
- Snap-track or DIN rail mounting
more information & related documents
Series Description
The BAPI BA/RCV Wireless Receivers detect the radio signals from sensor transmitters or BA/RPT repeaters and send the value through a hard-wired RS485 bus to dedicated output modules. Each receiver can accommodate 127 output modules, which come in a variety of output types including thermistor simulation (10K Ohm type 2 or 3), 4-20 mA, 0-5 VDC, 0-10 VDC, and solid-state switch. The BA/RCV418 receives signals directly from sensor transmitters at 418 MHz. The BA/RCV900 receives signals only from repeaters at 900 MHz.The BAPI BA/RPT Wireless Repeater detects all 418 MHz and repeated 900MHz transmitter signals, and re-transmits the signal at 900 MHz to extend useable wireless distance to 1000 feet open air. These signals are received with a BA/RCV900 for RS485 communication distribution to the output modules.
Kele Description
WIRELESS RECEIVER 900MHZ W/USB OUTPUT
Manufacturer
BAPI
418 MHz Receiver Installation Sheet 
